国際会議
2023
Hiroki YONEZAWA, Jun’ichi KANEKO, Takeyuki Abe, Naruhiro IRINO, Yuta SHINBA, Yasuhiro IMABEPPU
Development of precision analysis method of tooth profile in gear skiving process with shape projection of removal area
The 25th International Symposium on Advances in Abrasive Technology, 1115, 2023, 12, 12Kanta SAITO, Takeyuki Abe, Jun’ichi Kaneko
Elastic deformation of aluminum bronze / duplex stainless composite structures by wire arc additive manufacturing
The 25th International Symposium on Advances in Abrasive Technology, 1104, 2023, 12, 11Naoki Koyama, Takeyuki Abe, Jun’ichi Kaneko
Investigation of the relationship between electric power and deposited metal width in wire additive manufacturing using Joule heating
The 25th International Symposium on Advances in Abrasive Technology, 1122, 2023, 12, 11
Toshihiro KURODA, Jun’ichi Kaneko, Takeyuki Abe
Optimization method of NC command for feature line shape considering acceleration/deceleration characteristic of CNC machine tool
The 25th International Symposium on Advances in Abrasive Technology, 1158, 2023, 12, 12Takeyuki Abe, Tomoaki Kataoka, Jun’ichi Kaneko
Process planning for hybrid manufacturing based on base metal dimension and material consumption
The 25th International Symposium on Advances in Abrasive Technology, 1126, 2023, 12, 11
Gustavo Quadra Vieira dos Santos, Youhei Kujirai, Jun’ichi Kaneko, Takeyuki Abe
Study on the influence of the dendritic microstructure on the turning of WAAM Inconel 718
The 25th International Symposium on Advances in Abrasive Technology, 1167, 2023, 12, 11
Jun’ichi KANEKO, Takumi Osato, Takeyuki Abe
Support geometry position and removal sequence planning method considering loaded force during support removal for additive manufacturing products
The 25th International Symposium on Advances in Abrasive Technology, 1127, 2023, 12, 11
2022
Jun’ichi Kaneko, Yuki Hanada, Takeyuki Abe
Optimization of machine tool motion for finish machining process of turbine blade considering geometric failure on polygon data of workpiece shape
19th International Conference on Precision Engineering，C306，2022，11，29Gustavo Quadra Vieira dos Santos，Jun’ichi Kaneko，Takeyuki Abe
Analysis of the influences of different Tool Postures on the Machinability of WAAM Inconel 718
19th International Conference on Precision Engineering，C144，2022，12，1Akira Nishiyama, Tomoaki Kataoka, Shun Kayashima, Nobuyuki Sumi, Takashi Hashimoto, Takeyuki Abe, Jun’ichi Kaneko
Alternation sequence planning and process time estimation for hybrid additive and subtractive manufacturing
19th International Conference on Precision Engineering，C224，2022，12，1Kango Okabe，Naoya Katagiri，Takahumi Hanai，Masanori Kubota，Takeyuki Abe，Jun’ichi Kaneko
Influence of cooling temperature on CuSn alloy by wire and arc additive manufacturing with pure copper mold
19th International Conference on Precision Engineering，C265，2022，12，1Akira Nishiyama, Tomoaki Kataoka, Shun Kayashima, Nobuyuki Sumi, Takashi Hashimoto, Takeyuki Abe, Jun’ichi Kaneko
Development of process planning support system combining additive manufacturing and subtractive manufacturing
The 19th International Machine Tool Engineer’s Conference, 193, 2022
2021
Gustavo Quadra Vieira dos Santos, Jun’ichi Kaneko, Takeyuki Abe
Analysis of the Heat treatment effects on Inconel 718 products manufactured with the Wire and Arc Additive Manufacturing Technique
The 10th International Conference on Leading Edge Manufacturing in 21st Century, 420-424, 2021, 12, 15Kota Sugimoto, Yoritomo Ueda, Takeyuki Abe, Jun’ichi Kaneko
Mechanical properties of SUS329J4L fabricated by wire and arc additive manufacturing
The 10th International Conference on Leading Edge Manufacturing in 21st Century, 427-430, 2021, 12, 15Tomoyasu Shimada, Hideaki Nagamatsu, Takeyuki Abe, Jun’ichi Kaneko
Hiroyuki Sasahara, Mechanical properties and joining state in wire and arc additive manufacturing of Al-Si/Mg-Al-Zn dissimilar alloys
The 10th International Conference on Leading Edge Manufacturing in 21st Century, 435-439, 2021, 12, 15Kango Okabe，Naoya Katagiri，Takahumi Hanai，Masanori Kubota，Takeyuki Abe，Jun’ichi Kaneko
Influence of cooling temperature on CuSn alloy by wire and arc additive manufacturing with pure copper mold
19th International Conference on Precision Engineering，C265，2022，12，1
2020
Jun’inchi Kaneko, Yuki Okuma, Shumpei Sugita, Takeyuki Abe
Tool posture planning method for low rigidity workpiece considering elastic deformation caused by cutting force
JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, V001T04A006, 2020, 9, 3Kohei ichikawa, Takayuki Nakamura, Jun’inchi Kaneko, Masanobu Hasegawa, Takeyuki Abe
Development of tool path generation method for complex deep groove shape with simultaneous 4-axis machining
JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, V001T04A005, 2020, 9, 3Takayuki Nakamura, Kohei ichikawa, Masanobu Hasegawa, Jun’inchi Kaneko, Takeyuki Abe
Optimization method of rotational axis motion in 5-axis controlled machining to keep command tool feed rate
JSME 2020 Conference on Leading Edge Manufacturing/Materials and Processing, LEMP 2020, V001T04A007, 2020, 9, 3Yu Nakata, Jun’inchi Kaneko, Takeyuki Abe
Improvement in microstructure by wire arc additive manufacturing with finishing process
18th International Conference on Precision Engineering, 144-145, 2020, 11, 24, Kobe, JapanShun Kayashima, Takashi Hashimoto, Takeyuki Abe, Jun’ichi Kaneko
Modeling and control for preventing stubbing or droplets in Laser Metal-wire Deposition process
18th International Conference on Precision Engineering, 146-147, 2020, 11, 24, Kobe, JapanGustavo Quadra Vieira dos Santos, Jun’inchi Kaneko, Takeyuki Abe, Analysis of the Machinability and Machining effects on Properties of Inconel 718 Additive Manufacturing Products
18th International Conference on Precision Engineering, 160-161, 2020, 11, 24, Kobe, JapanJun’inchi Kaneko, Mayumi Kaneko, Takeyuki Abe
Development of tool shape estimation system with integrated multi-directional silhouette measurement
18th International Conference on Precision Engineering, 432-433, 2020, 11, 24, Kobe, Japan
2019
Takeyuki Abe, Jun’ichi Kaneko, Hiroyuki Sasahara
Deposited metal shape control based on numerical simulation for wire and arc additive manufacturing
8th International Conference of Asian Society for Precision Engineering and Nanotechnology, A33, 2019, Shimane, JapanGustavo Quadra Vieira dos Santos, Jun’Ichi Kaneko, Takeyuki Abe
Kenichiro Horio, Development of a Multi-axis controlled automated system for the Abrasive Blasting of FDM 3D printed Products
8th International Conference of Asian Society for Precision Engineering and Nanotechnology, P01, 2019, Shimane, Japan
2018
Takeyuki Abe, Hiroyuki Sasahara
Fabrication of Lattice Structures by Wire and Arc-based Additive Manufacturing
the 18th euspen International Conference & Exhibition (2018) 279-280Hiromu Kitahara, Jun’ichi Kaneko, Masahiro Ajisaka, Takeyuki Abe, Kenichiro Horio
New Calculation Method of Cutter Locations on Accurate Offset Surface based on Parallel Processing with GPU
The 17th International Conference on Precision Engineering (2018) A-4-2Gustavo Quadra Vieira Dos Santos, Jun’Ichi Kaneko, Takeyuki Abe, Kenichiro Horio
SURFACE TREATMENT AND TENSILE STRENGTH ANALYSIS OF FUSED FILAMENT FABRICATION ADDITIVE MANUFACTURED PRODUCTS TREATED WITH THE ABRASIVE BLASTING TECHNIQUE
2018 International Symposium on Flexible Automation (2018) S077Ryo Satoh, Jun’Ichi Kaneko, Takeyuki Abe Kenichiro Horio
FEED-RATE PREDICTION MODEL IN HIGH SPEED MACHINING FOR CUTTING FORCE ESTIMATION
2018 International Symposium on Flexible Automation (2018) S082
～2017
Kaneko,J., Teramoto,K., Horio,K., Takeuchi,Y. ”Direct Prediction of Cutting Error in Finish Endmilling Based on Sequence-Free Algorithm” Proceedings of the 5th International Conference on Machine Automation (ICMA2004) 239-244 (2004)
Kaneko,J., Horio,K. ”Fast Evaluation Method of Tool Posture for 5-Axis Control Machining Using New Functions of Graphics Hardware” Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 103-108 (2005)
Kaneko,J., Teramoto,K., Horio,K., Takeuchi,Y. ”New Prediction Method of Instantaneous Cutting Force in Finish Machining with consideration of Cutting Edge Roundness” Proceedings of the 4th International Conference on Manufacturing Research (ICMR2006) 307-312 (2006)
Teramoto,K., Kaneko,J., Ishida T.，Takeuchi,Y. ”A Fundamental Study of Compositional Machining Simulation” Proceedings of 8th International Conference on Progress of Machining Technology (ICPMT2006) 317-320 (2006)
Teramoto,K., Kaneko,J., Ishida,T., Takeuchi Y., “A Framework of Compositional Machining Simulation for Versatile Machining Simulation” Proceedings of the International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 461-464 (2007)
Kaneko,J., Teramoto,K., Horio,K., Takeuchi,Y.，”Fast Estimation Method of Workpiece Shape in NC Machining Process for Prediction of Instantaneous Cutting Force” Proceedings of the 7th International Conference on Machine Automation (ICMA2008) 357-362 (2008)
Yamauchi,Y., Kaneko,J., Horio,K., “Planning Method of Tool Posture for 3+2 Axis Control Machining using Graphics Device” Proceedings of 3rd International Conference of Asian Society for Precision Engineering and Nanotechnology 2009 (ASPEN2009 USB Memory) 1A1-14 (2009)
Kaneko,J., Horio,K., “Tool posture planning method for 5-axis control machining with an idea of spatial temporal representation based on machine tool coordinate system” Proceedings of the 5th International Conference on Leading Edge Manufacturing in 21st Century (LEM21) 149-154 (2009)
Kaneko,J., Horio,K.,“Tool posture planning method for continuous 5-axis control machining on machine tool coordinate system to optimize motion of translational axes” Proceedings of the 14th International Conference on Mechatronics Technology (ICMT2010), 32-37 (2010)
Kaneko,J., Horio,K., ” Tool Posture Planning Method for Continuous Multi Axis Control Machining with Consideration of Shortening Shank Length of Endmill” Proceedings of the 6th International Conference on Leading Edge Manufacturing in 21st Century (LEM21 CDROM), 3400 (2011)
Kaneko,J., Horio,K., “Planning of fixture condition for multi-axis controlled machining by parallel processing with GPGPU” Proceedings of 4th International Conference of Asian Society for Precision Engineering and Nanotechnology 2011 (ASPEN2011 USB Memory), 0149 (2011)
Kaneko,J., Horio,K., ”Planning method for fixture conditions of workpiece in continuous multi-axis controlled machining process with consideration of energy” 5th CIRP conference on HIGH PERFORMANCE CUTTING 2012, Procedia CIRP Vol.1 126-131 (2012)
Kaneko,J., Horio,K., ”Fast Cutter Workpiece Engagement Estimation Method for Prediction Of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining” 3rd CIRP conference on Process Machine Interactions, Procedia CIRP Vol.4 150-155 (2012)
Tsuchitana,Y., Kaneko,J., Horio,K., “Fast Simulation Algorithm of Voxel Representation Method for Multi Axis Control Machining – Geometric Representation and Collision Detection Considering the Architecture of Graphic Hardware -” Asian Conference on Design and Digital Engineering 2012, Proceedings of ACDDE2012 (2012)
Ivan Burdukovskyi, Kaneko,J., Horio,K., “Development of fixing system for 2-axis micro deep drilling assisted by low frequency vibration” Asian Society for Precision Engineering and Nanotechnology (ASPEN2013) (2013)
Ahmad Lutfi bin Othman, Jun’ichi KANEKO, Kenichiro HORIO, “Development of tool motion simulation method for cutting force prediction in high speed machining”, MJIT-JUC Joint International Symposium 2014 (MJJIS2014) (2014)
Kaneko,J., Horio,K., ”Fast Planning method of measurement posture to avoid interference between complicated suraface and laser lone of CCD displacement sensor” 15th International Conference on Precision Engineering (ICPE2014) (2014)
Kaneko,J., “Process Planning of NC Machining based on Parallel Processing with GPGPU”, International Symposium on Ultraprecision Engineering and Nanotechnology (ISUPEN2015) (2015)