Research paper

2023

  1. Akira Nishiyama, Shun Kayashima, Nobuyuki Sumi, Takashi Hashimoto, Takeyuki Abe, Jun’ichi Kaneko
    Process Planning with Removal of Melting Penetration and Temper Colors in 5-Axis Hybrid Additive and Subtractive Manufacturing
    International Journal of Automation Technology, 17, 4 (2023), 356-368
    https://doi.org/10.20965/ijat.2023.p0356
  2. Takeyuki Abe, Tomoaki Kataoka, Shun Kayashima, Nobuyuki Sumi, Takashi Hashimoto, Jun’ichi Kaneko
    Determination of alternation sequence for additive and subtractive manufacturing based on subtractive manufacturing simulation
    Precision Engineering, 80, (2023) 160-170
    https://doi.org/10.1016/j.precisioneng.2022.12.002

2022

  1. Gustavo Quadra Vieira dos Santos, Jun’ichi Kaneko, Takeyuki Abe
    Study on the Effects of Different Cutting Angles on the End-Milling of Wire and Arc Additive Manufacturing Inconel 718 WorkpiecesSimulating the build shape for a shell structure for wire and arc additive manufacturing using the bead cross-section model
    materials, 15, 2190, (2022) 
    https://doi.org/10.3390/ma15062190
  2. 間船 雄太, 片桐 直弥, 花井 孝文, 久保田 優典, 阿部 壮志, 金子 順一
    ワイヤ+アーク放電を用いたアディティブマニュファクチャリングによるCuSn合金の材料特性制御技術の開発
    日本機械学会論文集, 88, 909,(2022) 21-00353
    https://doi.org/10.1299/transjsme.21-00353

2021

  1. Takeyuki Abe, Hiroyuki Sasahara
    Simulating the build shape for a shell structure for wire and arc additive manufacturing using the bead cross-section model
    Journal of Advanced Mechanical Design, Systems, and Manufacturing, 15, 1, (2021), 1-13 https://doi.org/10.1299/jamdsm.2021jamdsm0001
  2. Yu Nakata, Takeyuki Abe, Jun’ichi Kaneko
    Suppression of anisotropy by wire and arc additive manufacturing with finishing process
    Journal of Advanced Mechanical Design, Systems, and Manufacturing, 15, 6,(2021) JAMDSM0066 https://doi.org/10.1299/jamdsm.2021jamdsm0066

2020

  1. Mayumi Kaneko, Takahiro Kaminaga, J. Kaneko, Kiyohiko Katano, T. Abe, and K. Horio
    Development of Tool Shape Estimation Method Integrating Multidirectional Optical Measurement
    Int. J. Automation Technol., 14, 3, (2020) 512-520 DOI: 10.20965/ijat.2020.p0512
  2. Yuki Saito, J. Kaneko, T. Abe, and K. Horio
    Development of Scanning Line Tool Path Generation Algorithm Using Boundary Position Information of Approximate Polyhedron of Complex Molds
    Int. J. Automation Technol., 14, 3, (2020) 491-499 DOI: 10.20965/ijat.2020.p0491
  3. Takeyuki Abe, J. Kaneko, and H. Sasahara
    Thermal sensing and heat input control for thin-walled structure building based on numerical simulation for wire and arc additive manufacturing
    Additive Manufacturing, 35, (2020) 101357 DOI: 10.1016/j.addma.2020.101357

2019

  1. T. Nakamura, J. Kaneko, T. Abe, and K. Horio
    Developing a Support System for Loading Planning
    Int. J. Automation Technol., 13, 4, (2019) 475-481 DOI: 10.20965/ijat.2019.p0475
  2. 北原 広,金子 順一,鰺坂 昌広,阿部 壮志,堀尾 健一郎
    大規模離散形状を対象とした高速な工具経路導出手法
    精密工学会誌,85巻,6号(2019)597-604.
  3. Takeyuki Abe, Hiroyuki Sasahara
    Layer geometry control for the fabrication of lattice structures by wire andarc additive manufacturing
    Additive Manufacturing, 28 (2019) 639-648.
  4. Hiromu Kitahara, Jun’ichi Kaneko, Masahiro Ajisaka, Takeyuki Abe Kenichiro Horio
    Accurate Tool Path Generation Method for Large-Scale Discrete Shapes
    International Journal of Automation Technology, 13, 2 (2019) 279-288.
  5. Takeyuki Abe, Daiki Mori, Keiji Sonoya, Masanobu Nakamura, Hiroyuki Sasahara
    Control of the chemical composition distribution in deposited metal by wire and arc-based additive manufacturing
    Precision Engineering, 55, 1 (2019) 231-239, https://doi.org/10.1016/j.precisioneng.2018.09.010
  1. Hisataka Takagi, Hiroyuki Sasahara, Takeyuki Abe, Hiroki Sannomiya, Shinichiro Nishiyama, Shuichiro Ohta, Kunimitsu Nakamura
    Material-property evaluation of magnesium alloys fabricated using wire-and-arc-based additive manufacturing
    Additive Manufacturing, 24 (2018) 498-507, https://doi.org/10.1016/j.addma.2018.10.026
  1. “Development of Tool Collision Avoidance Method Adapted to Uncut Workpiece Shape” Int. J. of Automation Technology Vol.11 No.2 235-241 (2017) Watanabe.K.,Kaneko.J.,Horio.K.

  2. “Method of Planning Tool Postures for Deep Groove Machining of Complex Shapes” Int. J. of Automation Technology Vol.11 No.2 226-234 (2017) Ichikawa.K.,Kaneko.J.,Hasegawa.M.,Iwasaki.T.,Horio.K.

  1. “Configuration Method of Fixing System with 2-Dimensionally Low-Frequency Vibration for Drilling to Decrease Influence from Unintended Displacement of Workpiece”,  Int. J. of Automation Technology Vol.9 No.2 161-169 (2015)
    Ivan Burdukovskyi, Jun’ichi Kaneko, Kenichiro Horio
  1. “Fast Estimation Method of Machining Area of Workpiece Suface for 3+2-Axis Control Machining Using Graphics Device – Visualization Algorithm of Machinable Area and Minimum Shank Length with Texture Projection Technique -“ Int. J. of Automation Technology Vol.8 No.3 420-427 (2014)
    Kaneko,J., Yamauchi,Y. Horio,K.
  1. 3+2軸制御加工における加工可能範囲のグラフィックスデバイスを用いた高速な導出法 -加工可能範囲および必要突き出し長さ分布のテクスチャ投影を用いた可視化- 精密工学会誌 79巻2号 182-186 (2013)
    金子順一,山内友樹,堀尾健一郎
  2. Voxel表現に基づく多軸制御切削加工シミュレーションの大規模並列処理手法 -グラフィックハードウェアのアーキテクチャを考慮した状態記述/干渉判定法- 精密工学会誌 79巻5号 467-472 (2013)
    土棚善貴,金子順一,堀尾健一郎
  3. ” Fast Cutter Workpiece Engagement Estimation Method for Prediction of Instantaneous Cutting Force in Continuous Multi-Axis Controlled Machining “ Int. J. of Automation Technology Vol.7 No.4 391-400 (2013)
    Kaneko,J., Horio,K.
  4. レーザー切断加工条件導出のための穿孔加工を利用する方法の検討 -エネルギ効率比の利用- 精密工学会誌 79巻7号 682-686 (2013)
    永野善己,堀尾健一郎,金子順一
  1. 微細深穴加工に対する低周波振動付加に関する研究 精密工学会誌 78巻2号 155-159 (2012)
    南部洋平,落合一裕,堀尾健一郎,金子順一,江原和樹,松田信一
  2. “Tool Posture Planning Method for Continuous Multi Axis Control Machining with Consideration of Shortening Shank Length of End Mill” Int. J. of Automation Technology Vol.6 No.5 648-653 (2012)
    Kaneko,J., Horio,K.
  3. “Workpiece Fixture Planning Method for Continuous Multi-Axis Machining with Consideration of Motion on Translational Axis” Int. J. of Automation Technology Vol.6 No.6 775-780 (2012)
    Kaneko,J., Horio,K.
  4. エンドミル加工の誤差補償System(第1報) -動たわみモデルによるボールエンドミル加工の誤差予測とNCデータ修正- 精密工学会誌 78巻11号 975-979 (2012)
    西川隆敏,菊田敬一,門藤至宏,筒元隆博,金子順一
  1. “Attempt to Increase Step Feed by Adding Ultrasonic Vibrations in Micro Deep Drilling” Journal of Advanced Mechanical Design, Systems and Manufacturing, No.5 Vol.2 129-138 (2011)
    Nambu, Y., Ochiai, K., Horio, K., Kaneko, J., Watanabe, T., Matsuda, S.
  2. 微細深穴加工におけるシンニングによって形成されるチゼルすくい角の影響 精密工学会誌,77巻7号 713-717 (2011)
    南部洋平,落合一裕,堀尾健一郎,金子順一,渡辺武,松田信一
  3. 超音波振動を援用した高アスペクト比微細深穴加工 精密工学会誌 77巻3号 306-310 (2011)
    南部洋平,落合一裕,堀尾健一郎,金子順一,渡辺武,松田信一
  4. “Tool Posture Planning Method for Continuous 5-Axis Control Machining on Machine Tool Coordinate System to Optimize Motion of Translational Axes” Int. J. of Automation Technology Vol.5 No.5  729-737 (2011)
    Kaneko,J., Horio,K.
  5. 大規模並列計算処理による多軸制御切削加工における最小工具突き出し長さの計画法 -ポリゴン形状の相対位置関係を考慮した干渉発生および加工可否の判定- 精密工学会誌,77巻2号 231-235 (2011)
    金子順一,堀尾健一郎
  1. 同時5軸制御加工における工具姿勢の工作機械旋回軸座標空間を用いた計画法 -工具姿勢決定機構への指令値候補に対する干渉状態と直進軸指令値の可視化- 精密工学会誌 75巻4号 530-535 (2009)
    金子順一
  2. A Study on Single Discharge Machining with Low Melting Temperature Alloy -The Relationship between Removal Volume of Crater and Single Discharge Conditions-,International Journal of Electrical Machining(14):37-41 200901
    Takezawa K., Kokubo H., Horio K., Mohri N.
  1. グラフィックスハードウェアを用いた形状評価における正確な曲面と視線との交差座標の導出法 -モデリング空間における視線交差位置の推定を利用した多面体近似時の誤差補正- 精密工学会誌 74巻5号 480-485 (2008)
    金子順一,堀尾健一郎
  2. 低融点合金を用いた単発放電に関する研究 1報,電気加工学会誌,42(99):5-11 2008
    武沢英樹,小久保博高,堀尾健一郎,毛利尚武
  3. New Approaches of Bevel Shape Generation for Quartz Crystal,Proc. American Society for Precision Engineering Annual Meeting:449-452 2008
    Horio.K., Kaneko.J., Yamazaki.T.
  1. A Study on the Material Removal Mechanism in EDM-Single Discharge Experiments with Low Melting Temperature Alloy-,2004 Proceeding of ASPE Annual Meeting:503-506 2004 
    Kokubo H., Horio K., Yamazaki T., Takezawa H. and Mohri N.

    The method of finishing the inside of a minute hole,2004 Proceeding of ASPE Annual Meeting:645-648 2004
    Mitsuhashi M., Horio K. and Yamazaki T.
  2. Which of the Material Properties Dominates Surface Roughness of Diamond Turned Plastics,Proc. 15th ASPE Annual Meeting:46-49 200010
    Horio, K., Nabeshima, M.
  3. 軟質砥粒を用いたダイヤモンドの研磨,砥粒加工学会誌,44(9):408-413 200009
    堀尾健一郎,兵頭誠,河西敏雄

    Tribo-chemical Smoothing of Diamond Film,Proc. 14th ASPE Annual Meeting:135-138 199911
    Horio, K., Hyohdoh, M. Kasai, T
  4. Cutting Temperature and its Effect to Sub-surface Damage in Diamond Turning,Proc. 12th ASPE Annual Meeting:199-202 199711
    Horio, K., Kasai, T., Sekiguchi, K.
  5. Figure Correction for Rotary Asymmetric Error by Linearly Arranged Segmented Pressurizing Polishing Machine,Proc. 12th ASPE Annual Meeting:275-278 199711
    Horio, K., Kasai, T. Matsuse, A.
  6. 5軸制御切削加工における工具姿勢のグラフィックスハードウェアを用いた高速な決定法 -被削物のオフセット面と視線群との交差判定を利用した加工可能工具姿勢範囲の導出- 精密工学会誌 72巻8号 1012-1017 (2006)
    金子順一,堀尾健一郎